1000 × 1000 / 1000 × 500 / 500 × 500 panels · 0.125–1,500 m³
SMC Modular Water Tank
Food-grade SMC panels bolted into any plan shape — 0.125 to 1,500 m³.
The SMC modular tank is assembled from hot-press moulded panels of food-grade Sheet Moulding Compound. Panels carry a concave arc in the centre for pressure capacity, 45° and 90° flanges on all four edges remove the need for corner connectors, and a dedicated non-toxic sealing strip holds the joints. Capacity runs from 0.125 m³ to 1,500 m³ in any plan shape, and the panels pass through a normal door, so a tank can be replaced without modifying the building.
Specification
| Panel material | Food-grade SMC (glass-reinforced polyester), hot-press moulded |
|---|---|
| Panel sizes | 1000 × 1000 mm (side and cover) · 1000 × 500 mm (standard side) · 500 × 500 mm (corner / small tank) |
| Panel thickness | 4 / 6 / 7 / 8 / 10 / 12 / 14 / 16 / 18 mm — 4 mm for covers only |
| Capacity | 0.125–1,500 m³, fully modular |
| Standards | JC 658.1-1997 · GB/T 17219-98 · water quality to GB 5749 |
| Structure | Concave arc panel centre; 45° / 90° edge flanges, no corner connectors |
| Sealing | Dedicated non-toxic strip — water resistant, high elasticity, low permanent set |
| Insulation | Optional PU or PE insulation layer |
| Mounting | Steel support bars on a level slab; no building modification for replacement |
Design notes
- Food-grade from the inside outFood-grade resin and a non-toxic sealing strip; the water quality statement follows GB 5749 drinking water requirements.
- Panels, not welded plateEvery panel is machine moulded under heat and pressure, so strength does not depend on how steady a welder's hand was that day.
- Fits through a doorThe largest panel is 1 m square, so a tank can be carried into an existing plant room and assembled in place.
- Any plan shapeRectangular, square or L-shaped — cells are laid out to the space, not the other way round.
Options
- PU / PE insulation for hot water or condensation control
- Stainless support frame and walkway
- Level gauge, overflow and drain fittings
- Potable-water commissioning and disinfection record
Applications
- Potable and domestic water storage
- Fire protection reserve tanks
- HVAC make-up and chilled water
- Reclaimed water and irrigation storage
Same series
Custom geometry
Water Storage Tanks — SMC, Steel & Stainless
304 / 316 Stainless Steel Welded Tank
Welded plate, …
Material304 or …
Open data sheet →
BDF composite · no welding
Water Storage Tanks — SMC, Steel & Stainless
BDF Composite Panel Water Tank
Stainless on t…
Panel build304/316…
Open data sheet →
0.125–1,500 m³
Water Storage Tanks — SMC, Steel & Stainless
Hot-Dip Galvanized Steel Water Tank
The economical…
MaterialHot-dip…
Open data sheet →