Export desk +86 153 1544 9600 sqr.jiuzhouge@gmail.com Mon–Sat 08:30–18:00 (GMT+8)

304/316 stainless + galvanized composite · BDF composite · no welding

BDF Composite Panel Water Tank

Stainless on the water side, galvanised steel taking the load — assembled without a welding set.

BDF panels put a 304/316 stainless face against the water and a galvanised steel layer behind it for strength. The result is a hygienic tank that assembles on site with bolts, no welding, no gas bottles and no hot-work permit. Capacity covers the same 0.125–1,500 m³ range, and a pump-integrated option folds the booster set into the tank base.

Specification

Panel build304/316 stainless water face + galvanised steel structural layer
Capacity0.125–1,500 m³
AssemblyBolted on site — no welding required
HygieneStainless contact surface; potable-water grade
StrengthGalvanised structural layer carries the hydraulic load
OptionsPump-integrated base, insulation, level control
SupportSteel base frame on a level slab

Design notes

  • No hot workBolted assembly means no welding permit, no fire watch and no shutdown of adjacent services during installation.
  • Stainless where water touchesThe water sees stainless, the structure sees galvanised steel — each material doing the job it is good at.
  • Pump inside the baseThe pump-integrated option puts the booster set under the tank, saving a separate plant-room footprint.
  • Potable and boiler dutySuits drinking water, food and beverage, and boiler make-up.

Options

  • Integrated booster pump set in the base
  • PU insulation and cladding
  • Level transmitter and BMS interface
  • Stainless ladder and maintenance platform

Applications

  • Drinking water storage
  • Food, beverage and boiler feed
  • Hospitals and hotels
  • Retrofit where hot work is not permitted

Same series

ข้อมูลทางเทคนิค ตารางสมรรถนะ และใบรับรองเผยแพร่เป็นภาษาอังกฤษเพื่อให้ตรงกับเอกสารต้นฉบับEnglish